|
|
Post by Amorsolo Villanda on Dec 12, 2006 20:24:32 GMT -5
So you want to Do it yourself huh? All right, you may manually configure myGlobe Settings in your V3x by modifying the pre-installed Web Sessions (This is one of the critical steps you may need to do to be able to use GPRS, WAP, and MMS since you only have One available space under Web Sessions Initially). Let's begin! 1. Go to Web Sessions and Select ANY of the Pre-Installed Settings and select Options -> Edit. 2. Edit Each Fields with the Parameters Below. (Note: You cannot Edit the Web Session's Name - But that's not a Problem): myGlobe GPRS Manual Config for Motorola v3x: Let's say you selected Celcom WAP Homepage: www.globe.com.ph/globe.wmlcService Type 1: WAP Proxy 1: 203.177.042.214 Port 1: 9201 Service 2: WAP Port 2: 9210 DNS 1: 000.000.000 DNS 2: 000.000.000 Speed: 9600 Line Type 1: ISDN Speed 2: 9600 Line Type 2: ISDN GPRS Application: www.globe.com.ph*Click Done myGlobe MMS Manual Config for Motorola v3x: Let's say you selected Celcom MMS Homepage: 192.40.100.22:10021/mmscService Type: WAP Proxy 1: 192.40.100.20 Port 1: 9201 Service Type 2: WAP Port 2: 9210 DNS 1: 000.000.000 DNS 2: 000.000.000 Speed: 9600 Line Type 1: ISDN Speed 2: 9600 Line Type 2: ISDN GPRS Application: mms.globe.com.ph *Click Done **Remember that you will need to set myGlobe GPRS as Default. 3. Now, go to Messages -> Options -> Setup -> Message Setup. Select Multimedia Message Setup and select Server Info. 4. You may see Maxim checked as your default MMS Server. We can change that and Name it to anything that you desire! Select Options -> Delete. Do this to delete all 3 Server Names under Server Info. Note: At this Point, you should see Service1, Service2, and Service3. 5. Go to Options then Select New. Enter the following Parameters: Service Name: anything you like Server Name: 192.40.100.22:10021/mmscWeb Session: Celcom MMS (Remember that this is what you selected in this Example. This is where we manually configured the myGlobe MMS settings) *Click Done **Now your MMS should be all set! |
|
|
|
Post by ash0279 on Dec 13, 2006 4:52:47 GMT -5
wow! i can browse now the 3G mobile site of myGlobe. the problem is, i cant still send MMS..  im on postpaid and i even tried switching my sim to my old K700i and i was able to send/receive MMS.. |
|
|
|
Post by Amorsolo Villanda on Dec 13, 2006 11:54:38 GMT -5
wow! i can browse now the 3G mobile site of myGlobe. the problem is, i cant still send MMS.. im on postpaid and i even tried switching my sim to my old K700i and i was able to send/receive MMS.. **There is definitely something wrong here. I tried to send an MMS as well and I was unable to do so. Please let me investigate on this. I will keep you posted! |
|
|
|
Post by Amorsolo Villanda on Dec 14, 2006 16:16:56 GMT -5
wow! i can browse now the 3G mobile site of myGlobe. the problem is, i cant still send MMS.. im on postpaid and i even tried switching my sim to my old K700i and i was able to send/receive MMS.. **There is definitely something wrong here. I tried to send an MMS as well and I was unable to do so. Please let me investigate on this. I will keep you posted! **I did check my MMS configuration and my Multimedia Setup yesterday and I was able to send an MMS using the same information I have provided above. Taking this into consideration, let us look closer to what we might be missing.   ![]() www.freewebs.com/solomoto/gprs icon.jpg[/img] |
|
|
|
Post by ash0279 on Dec 15, 2006 5:04:26 GMT -5
yahooo!! yess, thats it! what i've missed was to put "check mark", on the MMS profile which in my case "Cellcom MMS".
the config you posted above works perfectly... d**n the check mark.. hahaha...
|
|
|
|
Post by Amorsolo Villanda on Dec 15, 2006 12:00:08 GMT -5
yahooo!! yess, thats it! what i've missed was to put "check mark", on the MMS profile which in my case "Cellcom MMS". the config you posted above works perfectly... d**n the check mark.. hahaha... **There you go! Are you able to send and receive MMS now? I hope this forum is doing a great start! ;D |
|
|
|
Post by ash0279 on Dec 16, 2006 11:28:07 GMT -5
yep, sending/receiving works fine now.
and absolutely, this forum is doin a great start. hope we'll be joined by other moto users out there specially the v3x.
|
|
|
|
Post by Amorsolo Villanda on Dec 18, 2006 10:29:02 GMT -5
yep, sending/receiving works fine now. and absolutely, this forum is doin a great start. hope we'll be joined by other moto users out there specially the v3x. **Thanks Ash! And Yes, I hope people just post their Questions here than sending it to my personal email! ;D |
|
mau
New Member
Posts: 5
|
Post by mau on Dec 19, 2006 0:03:56 GMT -5
Hi. I'm new here and I can't seem to get Globe's Streaming setting. Can you teach me how to configure it manually? Thanks in advance.
|
|
|
|
Post by Amorsolo Villanda on Dec 19, 2006 12:20:00 GMT -5
Hi. I'm new here and I can't seem to get Globe's Streaming setting. Can you teach me how to configure it manually? Thanks in advance. **Welcome Mau! Well, I don't have the Manual configuration for myGlobe Stream at this point. For the meantime, you may want to try sending STREAM to 2951 again - but let's try to do this around these times: 9pm to 11pm. I know this will sound crazy but it will not harm if you try. I had the same problem getting this setting before but I did not stop until I was able to. *hehehehehe* As soon as I get my hands on this Manual Setting, you will see it here! Cheers! |
|
mau
New Member
Posts: 5
|
Post by mau on Dec 20, 2006 0:43:54 GMT -5
I called Globe a while ago and the lady said that I needed to have a real one player installed to get my streaming to work. Is this true? How do I get a Real One player?
|
|
|
|
Post by Amorsolo Villanda on Dec 20, 2006 9:34:13 GMT -5
I called Globe a while ago and the lady said that I needed to have a real one player installed to get my streaming to work. Is this true? How do I get a Real One player? **This is True for other mobile phones since you need to have something to play the videos and sounds. Without this, you will not be able to. The Good News is, your MotorolaRazr V3x is RealOne Enabled! Try to follow the steps under Streaming which I posted and try to connect to CNN first. Once you are connected, you will see a RealOne animation before buffering. Surely, there are Customer Representatives that doesn't know what they are saying! Sadly enough, that is Normal. Peace!  Try it and see for yourself. ;D |
|
|
|
Post by aubrey12x on Dec 25, 2006 10:21:12 GMT -5
i have been trying to request for the stream settings from globe, i received a txt msg that i should be getting it within 24 hours but still no settings yet.
i guess i should try and try! any more suggestions?
|
|
|
|
Post by Mr Admin on Dec 25, 2006 12:25:54 GMT -5
???Am not really sure why you cant provide the stream settings since its already listed as one of the web sessions. You can just edit it for you to get the settings. If the case is that particular web session is locked then i may be able to provide you a program to unlock it for you to edit it and provide us the settings afterwards. You can also use this to delete locked web session that came pre installed from the phone to install new web sessions. Its called "LeaderGL FlexEditor" just google.it I already have the stream settings from Globe but it still doesnt work  , no use posting it here. Also for the GPRS Settings homepage if it doesnt work you can use this instead Homepage: www.globe.com.ph/globe.aspWould really appreciate it if you can provide the stream settings that you are using since its working on your end rather than waiting for the settings from globe that doesnt work at least thats whats happening ;D |
|
|
|
Post by Amorsolo Villanda on Dec 26, 2006 13:24:24 GMT -5
???Am not really sure why you cant provide the stream settings since its already listed as one of the web sessions. You can just edit it for you to get the settings. If the case is that particular web session is locked then i may be able to provide you a program to unlock it for you to edit it and provide us the settings afterwards. You can also use this to delete locked web session that came pre installed from the phone to install new web sessions. Its called "LeaderGL FlexEditor" just google.it I already have the stream settings from Globe but it still doesnt work , no use posting it here. Also for the GPRS Settings homepage if it doesnt work you can use this instead Homepage: www.globe.com.ph/globe.aspWould really appreciate it if you can provide the stream settings that you are using since its working on your end rather than waiting for the settings from globe that doesnt work at least thats whats happening ;D **That's the problem. My Stream Setting is locked since it came from Globe's 2951. I flashed my phone to delete the pre-installed Web Sessions. I am familiar with the LeaderGL FlexEditor but still hesitant to use it. I will keep you guys posted. ;D |
|
, no use posting it here.